IP66 Average less than or equal to 40W, Peak 100W IR LED STROBE LIGHT LED IR light Infrared lamp flash lamp Outdoor LED lamp

IP66 Average less than or equal to 40W, Peak 100W IR LED STROBE LIGHT LED IR light Infrared lamp flash lamp Outdoor LED lamp
  • Продавецyourartsdesire.us
  • Список ценUS $365.22piece
  • Продажная ценаUS $365.22piece
  • ДоставкаБесплатная доставка
  • Рейтинги3,9 (167)

Oписание продукта

 

 
 
 
Certificate 

 certificate  

 GZN-3101-IR Product Overview

Copyright Announcement   

Trademark, name of software and hardware mentioned in this user manual are all belong to the corresponding company. Without our company\'s official permission, no organization or individual are allowed to copy or spread this user manual in any form by any means.

The contents of this manual will be changed without prior notice.

 

 

I. Product Feature

1)  Low response time.

2) Support White light flash in high power.

3) Support synchronization with camera for video record or snapshot.

4) Support input with continuous signal or trigger signal.

5) Parameter setting through RS485, saving data instantly.

6) Support 16pcs LED strobe light controlled via one software.

7) Suitable for multiple ambient lighting requests, brightness is adjustable.

8) Available distance for number plate at 20 to 50mtrs.

 

II. Specification

Model: GZN-3101-IR

Main Processor: High performance MCU

User Interface: RS485 via PC

LED: IR: 48pcs Epistar high power infrared LED

Beam Angle: 15 degree (standard), 30 degree, 45 degree (optional)

D/N switch:  Auto

Flash: Input signal trigger for snapshot.

Strobe: Input continuous signal for video record.

              Mode D: Continuous strobe under 100Hz frequency, duty cycle adjustable; 

              (Compatible with Dahua’s ITS camera.)

              Mode H: Sync. by multiple frequency pulse signal from camera, duty cycle cannot over 50%.

              (Compatible with Hikvision’s ITS camera.)

Parameter Setting: support internal setting of flash and strobe.

Power Supply: AC110V/ AC165~220V

Power Consumption: IR: Average≤40W,  Peak:100W

Flash Duration Time: 1ms to 5ms(Unit: ms)

Trigger Delay: 0ms to 5ms(Unit: ms)

Strobe Brightness Level: 1 to 5

Trigger Method: electrical level, switching value, RS485 order

Protection level: IP66

Working temperature: - 40 to + 50 degree celsius

Storage temperature: - 40 to + 85 degree celsius

N.W. : 3.75kg

Product Size: 261*261*90mm

 

 

III. Hardware

I/O of control signal, trigger signal and strobe.

 

 

Wiring definition

a. Control: 

b. Flash Trigger: 

c. Video Strobe: 

 

The principle diagram of interface

The principle diagram of interface

Wiring diagram

    a. flash mode

flash mode

b. strobe mode

strobe mode

c. connection

connection

1)  Input electrical/switching signal to LED strobe light.

2)  Adjust delay time and duration time through RS485 on PC

3)  Maximum trigger frequency 100Hz

4)  Video strobe duration time: Maximum 5ms.

      Flash trigger duration time: Maximun10ms.

5)  Support input voltage DC3.3V-DC12V

 

Software

The software control program is used to setting up configuration parameters of our company\'s LED strobe light. Through RS485 it is able to control and set up parameters of maximum 16pcs online LED Strobe lights easily.

Support System

Windows 32-bit operating system; i.e: Win2000/XP etc.

Software Interface

Software Interface

1. Port: Click the drop-down list choose control PC and Serial port of LED Strobe light, make sure communication is normal controlling.

Note: A. If communication is normal, the strobe mode will turn OFF automatically and the operate log will show the status. Now you can set up other parameter. If communication is not normal, check and make sure all cable are connected correctly.

     B. After all parameter set up are ready, click the strobe switch into ON and the strobe light will lighting. If no lighting means the product is not working normally. Please retry connection again.

2. Set Up Address: Click the drop-down list to change the current selected strobe light address, after change successfully the new address will be writing in.

Note: Address cannot be reduplicated as the current on-line strobe light.

3. Strobe Mode: Select model D and H to adapt to different camera. 

    Mode D: Click Strobe Switch ON, the product will start to strobe by video sync. Signal of camera.

    Mode H: Click Strobe Switch ON, the product will not strobe until camera gives pulse trigger signal. Set up multiple frequency pulse and duty ratio of the camera to proper way.

4. Flash Duration Time: Click the drop-down list to change the flash duration time of current strobe light. Each step 1ms, range 1ms~5ms.

Note: Keep flash time and shuttle time in the same.

5. Flash Delay: Click the drop-down list to change flash delay of current strobe light. Each step 1ms, range 0ms~5ms.

Note: Default: 0ms.

6. Strobe Switch: Click ON: Strobe all the time. Click OFF: No strobe. Click AUTO Strobe will be controlled by Day/Night switch sensor.

Note: Only when the Strobe Switch set to OFF, other parameter setting can be done. If you want to modify other setting, please set it off at first.

7. Threshold Level: Available when Strobe Switch to Auto. Click drop-down list to adjust the brightness level of Day/Night switch, level 0-5.

8. Strobe Brightness: Click the drop-down list to change the brightness of strobe, level 1-5. (1=1ms)

9. Trigger Flash: Click the button to trigger the product flash under current setting of Flash Duration Time and Flash Delay.

10. Operate log will updated whether your setting is successful or failed, check the operate log after every step.

Warning

1) The same RS485 port can\'t connect to two strobe light with same address, otherwise it may cause hardware damage.

2) The power wire should connect to ground wire, otherwise may cause electrical shock.

 

 

IV. Dimension:

 

V. After sales service

Product damaged except artificial reason and the force majeure is under 36 months warranty, lifetime maintenance with cost price.

 

 

 

 

High Intensity Light Complement Manufacturer

 

Must Read


Limit Warranty


Buy the product( s)  from "Scene",  you agree to terms and conditions of warranties and policies as below:

1. All equipments carry a 36 months replacement/repair warranty from date of purchase against defects in workmanship and materials.
A. Please contact us within 14 days upon item received and provide its status image.
B. Please contact us for a RMA form and return item for replacement or refund.
C. All returns/ exchanges must be in brand new & resalable condition and in original packing.
D. Replacement or full refund will be provided upon item arrival. If we on longer carry item that returned due to a manufactures defect, we will send a working comparable new item of our choice.
E. We will cover return postage.

2. "Scene" is not responsible for improper installation, modificatio, voltage spikes, misuse of products, chromatic aberration problem or the item no measuring up to expectations, Corrosion due to improper care of salt spray in snow or beach areas is not covered.
A. Pls contact us within 14 days upon item received.
B. All returns/exchanges must be in brand new & resalable condition and in original packing.
C. Buyer must pay all postage cost of return and replacement.
D. Replacement or full refund will be provided upon item arrival. If we on longer carry item that returned due to a manufactures defect, we will send a working comparable new item of our choice.

3. Shipping and handling fees are non-refundable for all returned items.

4. Purchaser assumes all liability for using these products in compliance with all applicabl state and federeal laws regarding surreptitious audio and vedio recording or monitoring.

Payments and shipping Information
1. Normally Parcels will be shipped from China via Express air. The tracking number will E-mail to you when item sent.  Pls contact the sales before paying about the shippment way and freight fee, particularly the country Russia, The Republic of Belarus, Angola, Brazil, Latvia, Azerbaijan, Turkey, Ukraine and so on.
2. Payment by Escrow only, Parcels will shipped out within 3-5 workdays after received the payment and delivery to your address.
3. We can not delivery to P.O. Box numbers. Pls provide physical address & contact phone number.
4. To avoid delays caused by delivery failure, please ensure to send your detailed address and full name to us, please specify a note while you making the payment on Escrow. We will not responsible for extra shipment and delivery cost which is caused by a wrong or undeliveralbe address was supplied.

Combine shipping Discounts
The shipping cost are include packing material, handling charge and shipping cost. Need pay all items shipping.


Customs Notice
Please note you must borne for any additional charges, import duties or taxes in case it is still required from the customs in your Country.