pcmos Real Carbon Fiber Interior Drive Panel Cover Trim Fits For Infiniti Q50 2014 2015 2016 2017 2018 New Interior Mouldings

pcmos Real Carbon Fiber Interior Drive Panel Cover Trim Fits For Infiniti Q50 2014 2015 2016 2017 2018 New Interior Mouldings
  • Продавецyourartsdesire.us
  • Список ценUS $23.99piece
  • Продажная ценаUS $23.99piece
  • ДоставкаБесплатная доставка
  • Рейтинги4,7 (866)

Oписание продукта

I. outline
Adopt brand high power IPM module, 5.5KW, 600V or 1200V, voltage grade optional;
Can drive less than 5.5KW, PMSM, BLDC, ACIM (three-phase AC asynchronous motor) and other motors;
On board braking resistor control circuit, three resistance current sampling loop, HALL/ENC input circuit, etc.;
Simple and easy to use, good protection performance, can connect the company or ST company\'s master board, also can receive the user\'s own DSP or other MCU main control board, and provide a flexible and reliable hardware platform for various applications;
It can provide an all digital experiment and research platform for the development of electric vehicle controller, BLDC/PMSM control, frequency conversion air conditioning, industrial sewing machine, solar inverter power station, UPS and so on.
 
Power side parameter
Motor with maximum drive power rating of 5.5KW. Support power output range: 0 ~ 5.5KW.
Adopt brand IPM module, 600V grade or 1200V grade optional. When ordering, please pre declare the module that requires that level and defaults to 600V.
When selecting the 600V level, the motor power supply voltage (P+, P-) support: 24V ~ 310V, DC input.
When selecting the 1200V level, the motor power supply voltage (P+, P-) support: 24V ~ 600V, DC input.
In general, the 600V class modules are suitable for: 110V, AC or 220V AC voltage motors; 1200V class modules are suitable for three-phase 380V, AC voltage motors.
The on-board braking resistor control circuit uses the IGBT power tube. The default is "15A", and if required, please declare in advance when ordering.
The braking resistor is optional, and if required, please declare in advance.
The driver board for non isolation (Raidi) design, such as isolation, please advance statement.
The drive board supports PMSM motor, BLDC motor, ACIM (three-phase AC asynchronous motor) and other motors
Control side parameter
Control power supply and motor power supply separately; due to the use of IPM module, control power supply only a single DC voltage, support DC:24V ~ 48V (MAX, 60V) direct input.
Onboard 2 high withstand voltage DC/DC modules, respectively, transform the +15V for IPM module, 5V voltage for control loop
For convenience of entry and experiment, three resistance method is adopted for current sampling. The resistance value is 0.05 ohms, the amplification factor is 16.5, and the DC bias voltage is 1.65V. The maximum sampling power range is approximately 2A. (customers should adjust according to their actual situation)
Onboard Holzer (HALL) and encoder (ENCode) input interface
Onboard compatible ST official motor interface, IDC34, PIN. Support all kinds of motor STM32 and STM8 master board of our company or ST. You can also connect all kinds of DSP or other MCU main control panel.
The interface signal includes: 6 way PWM, 3 current, bus voltage, IPM module temperature, IPM module alarm, 3 way HALL, 3 way ENCode, brake signal, NTC relay control signal, PFC control signal, etc.
The 6 way PWM control signal is compatible with 3.3V or 5V voltage. Current feedback signals 0 ~ 3.3V.