Generic Wiegand 3211TW TCP/IP Network Access Control Board Single door two way control panel Metal outer box support WG26 Carea

Generic Wiegand 3211TW TCP/IP Network Access Control Board Single door two way control panel Metal outer box support WG26 Carea
  • Продавецyourartsdesire.us
  • Список ценUS $66.60piece
  • Продажная ценаUS $66.60piece
  • ДоставкаБесплатная доставка
  • Рейтинги4,6 (621)

Oписание продукта

We have the electonic software, We usually send customer by Email. Kinly leave your message after Place an order when you need . Each one set with 1 pcs card for testing .

 

The UHF RFID Middle Range Reader is a high performance UHF integrated reader .Based on proprietary efficient digital signal processing algorithm, it supports fast tag read/write operation with high identification rate. It can be widely applied in many RFID application systems such aslogistics, access control, and anti-counterfeit and industrial production process control system.

 

Specification:

 

Type: UHF passive Middle Range Integrated Reader

Dimension: 235*235*57mm

Net Weight: 900g

Operating Temp:-10 ~ +60°C

Storage Temp:-25 ~ +80°C

Interface: RS232/ UART, RS485, wiegand 26/34

Indicator: Buzzer

Power Supply : +DC9V ( equipped with power adaptor)

RFID Parameters:

Frequency Range: 902-928 mhz( FCC), 865-868 mhz (CE)

Protocols: ISO18000-6B, ISO18000-6C/ EPC GEN2

Work Mode: FHSS Hopping and Fixed Frequency

RF Power: 0-30 dBM, Adjustable set by software

Antenna: Built-in 8dbi Circularly polarized antenna

Read Range: 6M , tag and environment dependent

 Read Mode: Active , Answer , Trigger Working Mode, Software Programmable

Vehicle Moving Speed: 80 Km/h

Software: Provide SDK ,DLL and Demonstration Software, Sample code to facilitate further development.

 

for the reading distance , it could read max 6 m distance , sometime it more than 6m when you use American frequency . the reading distance is related with enviroment , if there is Signal interference with different frequencies  , the reading distance will be shorter ,seriously , it will not be reading card .

our software of UHF reader , it\'s same as our USB UHF writer , actually , the USB intereface is for USB UHF writter .  When the customer use the RS232 TO USB conveter to connect the UHF reader , pls change the USB interface in software , and the reading distance will be shortter . 

kinldy inform that .

 

Image ( RS232/RS485, Wiegand 26/34)

 

 

 

 

 

 

 

 

 

We also have the UHF tags and cards, it\'s optional ,kindly contact seller when you need.

 

 

 

 

 

 

123456