Switching Power Supply 48V 1000W 20.8A CNC Power Supply 115V/230V AC power source for CNC Router Kits

Switching Power Supply 48V 1000W 20.8A CNC Power Supply 115V/230V AC power source for CNC Router Kits
  • Продавецyourartsdesire.us
  • Список ценUS $174.12piece
  • Продажная ценаUS $174.12piece
  • ДоставкаБесплатная доставка
  • Рейтинги3,1 (290)

Oписание продукта



Main characteristic: 1st, the compatibility is good, may adapt multi-factory 60w, the 50w laser tube; 2nd, the cutting power output is stable, the carving speed of response is quick, the effect is good; 3rd, remarkable extension laser tube service life; 4th, the control is simple, may choose Gao Huodi the level control, simultaneously matches the water-treatment protection post, exterior the examination whether lets water through, ventilates and so on; 5th, the laser power control is simple, then uses the 0-5v simulated signal control laser amount of power, also may through the PWM signal control; 6th, power source itself has the opening protection function, in the protective earthing good situation, the power source may the short time be at the opening condition, because like this may avoid the laser pipe explosion creating the laser power source the harm, thus enhanced the power source life. 7th, power source itself has the feedback connection, available in closed-loop control, also may use in examining the laser the practical work electric current. 
Main technical parameter: Input input voltage AC220V or AC110V (when ordering should explain specially) exchanges frequency 47---440Hz cold condition surge current ≤60A (when AC220V input) ≤30A (when AC110V input) divulges the electric current ≤0.7mA (when the AC220V input) ≤0.4mA (when AC110V input) outputs maximum output voltage DC 35KV maximum output electric current DC 23 mA efficiencies ≥90% (when full load) the mean time between failure ≥10000 hour speed of response ≤1mS (gives output current from switching signal to rise to hypothesis electric current 90% time) controls the connection TTL level switch control, the effective level may high, the low choice (for details see control post showing) the pressure resistance input - output, the input